Push Pull Linear Electromagnetic Solenoids

Push Pull Linear Electromagnetic Solenoids are such electrical devices that are used for converting the electrical energy into linear mechanical motion. The energy produced within these Push Pull Linear Electromagnetic Solenoids can be used for providing a straight linear pulling action or it can be converted as well to provide a rotary action. In both the cases, the magnetic pull force increases as the air gap is reduced between armature and core. While selecting Push Pull Linear Electromagnetic Solenoids, various factors should be considered such as force, stroke, duty cycle and pushing or pulling. Our Push Pull Linear Electromagnetic Solenoids are applied in automobile industries, packaging, textile, automations, elevators, printing, and general machine tools.

We offer the following type of solenoids in variety of sizes

• Single Action linear Solenoid : A linear stroke motion from the start position to the end position. The return action is effected by some other external force / mechanism. Depending on the solenoid design, the force can be applied in a â��PUSHâ�� or â��PULLâ�� sense.
• Double Acting Linear Solenoid : This in effect is two solenoids back to back, the stroke obtained by energizing in one of the two opposing directions from neutral.
• Rotary Solenoid : Utilizes rotary motion from a neutral position when the solenoid is energized. Standard travel is 25 - 95º. Return action is via some other external means.

Specifications

• Force Range : 5 N - 120 N
• Stroke : 2mm 35 mm
• Voltage : 12 / 24 V D C